|
<< Click to Display Table of Contents >> Air Filter Cartridge |
  
|
|
<< Click to Display Table of Contents >> Air Filter Cartridge |
|
The printer is pre-installed with a HEPA+Active Carbon filter cartridge to reduce odor and fumes. It is recommended that this filter is replaced roughly every two months, based on printing 2-4 hours per day.
|
Write the installation date on the filter or put a reminder in your calendar so that you remember to replace the filter regularly. |
Push the filter out from the back using the hole on the left side of the filter box. Then pull it out to the right. See step-by-step guide below.
Put the new filter in place, using the reverse procedure.
|
Please observe that the black side of the filter cartridge should face backwards, for optimum performance. |
